DPF cleaning machine development market forecast: PFA 5445 for details.
Self driving requires dismantling the vehicle and changing to a new station (1). That is to say, when auto parts are processed, or bulk parts or no parts are piled up, they will become anxious, Tiktok and have some force. At this time, you can use the non disassembly cleaning machine, and simplify the manual work of disassembly and assembly of vehicles.
Self driving requires dismantling the vehicle and changing to a new station (1). A typical autonomous driving system involves dismantling the vehicle and changing to a new station (1). For example, simple driving plans, the automotive industry, compressors, inspection motors, and similar truck solutions will become more efficient.
The electroplating industry’s autonomous driving system will be dismantled and replaced with a new station (2). The current autonomous driving system involves dismantling vehicles to change stations, the hardware industry, the required professional technical cleaning equipment, and efficient technical cleaning equipment for the surrounding tools.
Self driving requires dismantling the vehicle and changing to a new station (3). For example, the cleaning operation of electric vehicle cleaning machines can save manpower and improve work efficiency. Because every cleaning operation requires a lot of time and effort, the environmental requirements are becoming increasingly high.
Disassemble the machine first for autonomous driving. As is well known, electric vehicle cleaning machines have become an emerging product in recent years. Generally speaking, electric vehicle cleaning machines can be divided into two types: household and professional. So what is the difference between them?
Disassemble the machine first for autonomous driving. The scrapped and scrapped vehicles will undergo trial operation. For example, if you only need to take one side of the vehicle, you can scrap it all and replace it with a new one.
This cleaning operation is not only for the convenience of some “must-have” equipment. It is also to save money and require more maintenance in the later stages, so it is becoming increasingly popular.
Before use, check the safety cover of the vehicle to ensure that it is of good quality (vehicle self-locking), otherwise it may jump.
After use, check the water in the clean water tank to see if there is any overflow port. If there is no overflow port, it should be taken out in a timely manner.
Set the temperature controller to the “” state, debug for 15 minutes, check the water pump, and confirm that there are no abnormalities before starting operation.
When the rack is not disassembled, replace or repair it for maintenance, and then restart it for use.
When using in winter, it is necessary to drain the water in the water tank thoroughly and prevent water from entering, in order to prevent scale from freezing.
Before use, the cleaning pump must be evenly distributed on the bottom of the cylinder without deformation. Antirust oil should be applied to the bottom of the cylinder to prevent glue and corrosion.
After being used by the customer, all nuts and chains must wear insulated gloves and shoes, enter the engine compartment, and then throw them.
When strong ultrasound is found to be unable to operate normally, the cause should be analyzed and the shutdown should be suspended in the following situations.
● It is not allowed to start and run for a long time (if the power cord needs to be extended, please remove and ground the transducer).
Only in the shutdown state can the valve be opened to release favorable nitrogen gas.
Process flow: The parameter selection is based on the twisting method to select the ultrasonic frequency. The higher the low-frequency ultrasonic power density, the corresponding 15-30 minutes, and the lower the numerical value. To ensure continuous stability, the higher the output power of the low-frequency ultrasonic cleaning machine, combined with the corresponding anti generator, the smaller it will be; However, low-frequency ultrasound frequency is suitable for precision components. The lower the high-frequency ultrasound frequency, the more bubbles generated, and the more significant it is for protecting sensitive components.